The rubber surface of collar lining is generally flat rubber. It looks like a bright layer of glue. Pressing temperature of collar lining: 170 ℃ + steam
Method 1: fold the lining in half, use 1 / 2 net collar sample and draw it on the lining. Then cut off the net collar lining. Tip: when cutting, do not cut out of place.
Method 2: lay the lining flat with the rubber surface downward, then draw the complete collar lining with the net sample, and then cut off the net collar lining. The collar cut in this way is not easy to be misplaced. The rubber lining needs high temperature to melt, about 170 ° C + steam. Note: 170 ° C is generally at the "cotton and linen" position of the iron. The collar made in this way is flat and straight. In addition, the collar lining of the overcoat should also be cut into a clean collar. Generally, the collar lining is used on the collar surface. Tailoring of suit collar: the collar surface is cut horizontally, and the collar bottom is cut 45 ° obliquely. Thin collar is used for suit collar.


